Publicité
Les langues disponibles
Les langues disponibles
OPERATING INSTRUCTIONS
WARNING
circuit, never immerse your charger or battery pack in fluid
or allow a fluid to flow inside them. Corrosive or conductive
fluids, such as seawater, certain industrial chemicals, and
bleach or bleach-containing products, etc, can cause a short
circuit.
When to Charge the Battery Pack
It is not necessary to run down the battery pack charge before
recharging. The Lithium-Ion battery can be charged at any time
and will not develop a "memory" when charged after only a partial
discharge.
Remove the battery pack from the tool when it is convenient for you
and your job.
"Top off" the battery pack charge by charging it for a time before
starting a big job or use for a long period.
How to Charge the Battery Pack
NOTICE: The Lithium battery pack
is shipped partially charged.
Before using it the first time, fully
charge the battery pack.
a. Charge the battery pack with the
correct charger.
b. Connect the charger to a power
supply. The red Defect Indicator
and the green Normal Charging
Indicator will both shine for one
second and then go out, indicating that the charger self-inspection
is completed.
14
To reduce the risk of fire, personal injury,
and product damage due to a short
Fig. 2
Attach
Publicité
