KitchenAid KSBR256 Mode D'emploi page 10

Install the Blade Assembly with the blade facing downwards into the Jar. Twist the Blade
3.
Assembly clockwise (right) to lock into place.
Make sure the seal between the Blade Assembly and the Jar is in place. Do
NOTE
:
not operate without a seal.
Ensure that the motor Base is sitting on a clean, dry surface. Place the blending Jar onto
4.
the motor Base with the Blade Assembly at the bottom and turn to lock into place. The Jar
is securely in place when a click sound is heard. Always ensure it is locked into place
before using the Blender. If the Blade Assembly and Jar are not properly attached, the
Blender will not operate.
To operate, press the ON/OFF (
5.
will start. Press the ON/OFF (
The ON/OFF (
NOTE
:
one minute before turning off automatically.
10
) button once. The LED light will display and the motor
) button again to turn the unit off.
) button is a pre-programmed function. The unit will run for