INDASA E Série Manuel D'instructions page 24

ly to seek medical attention. Hand, wrist and arm injury may result from repetitive work,
motion and overexposure to vibration.
To reduce the risks associated with loud noise :
• Always wear hearing protection while operating this tool. Follow your employer's safety
policy or local/national standards for personal protective equipment requirements.
To reduce the risks associated with fire or explosion :
• Do not operate the tool in explosive atmospheres, such as in the presence of flam-
mable liquids, gases, or dust. The abrasives are able to create sparks when working
material, resulting in the ignition of the fl ammable dust or fumes.
• Refer to MSDS of material being worked as to potential for creating fi re or explosion
hazard.
To reduce the risks associated with ingestion of harmful / toxic dusts from sanding
surfaces such as lead painted surfaces, woods and metals:
• Contact with or inhalation of these dusts can endanger the health of operator and
bystanders. Use appropriate personal protective equipment.
• Use appropriate respiratory and skin protection, or local exhaust as stated in the
MSDS of the material being worked on.
To reduce the risk associated with environmental contamination:
• Do not throw electric power tools into the household waste! In accordance with the
European Directive 2002/96/CE on Waste Electrical and Electronic Equipment and
transposition into national law, used electric power tools must be collected separately
and recycled in an environmentally friendly manner.
• Separate collection of used products and packaging allows materials to be recycled.
Use of recycled materials helps prevent environmental pollution and reduces the de-
mand for raw materials.
• Dispose of all the process dust in accordance with all applicable regulations.
To reduce the risks associated with fly off of abrasive product or parts:
• Use care in attaching abrasive product and disc pad; following the instructions to
ensure that they are securely attached to the tool before use.
• Never free spin the tool or otherwise allow it to be started unintentionally.
• Never point this product in the direction of yourself or another person, or start tool
unintentionally.
• Never over-tighten accessory fasteners.
24
Caution