Whirlpool Gladiator ARMOIRE DE POSTE DE TRAVAIL Instructions D'assemblage page 6

3. Insert another bolt (F1) through the underside of the bottom (P2)
and into the elongated hole at back of each hinge bracket.
Fasten each bolt with a flange nut (F2), as shown.
P4
P1
P2
P8
A. Hinge bracket
4. Thread the fold-down door cable into the slot in the bottom of
each cable bracket (one on each side), as shown.
A
P4
P1
B
C
A. Cable bracket
B. Door cable
6
P3
A
P1
P4
P2
P8
5. Pull down on the cable until it is firmly seated in the slot.
6. Insert the door catch pins (F5) into the holes in the cable
brackets, and fasten them with the star nuts (F6), as shown.
P1
A
B
A. Star nut
B. Door catch pin
7. Close the door.
8. Using the Allen wrench (provided), completely tighten all the
bolts.
P4