Publicité
Les langues disponibles
Les langues disponibles
6. Protect the air hose from damage and puncture. Inspect them weekly for weak or worn
spots, and replace if necessary.
7. To reduce the risk of electric shock, do not expose to rain. Store indoors.
CALIFORNIA PROPOSITION 65 WARNING: This product contains chemicals
known to the State of California to cause cancer, birth defects and/or
reproductive harm.
MODEL NO.
PXCMPC1682066
PXCMLC1683066
BASIC AIR COMPRESSOR COMPONENTS
The basic components of the air compressor are the electric motor, pump,
pressure switch and tank (see Fig. 1).
The electric motor (see A) powers the pump. The electric motor is equipped
with an overload protector to help prevent possible motor burnout. If the motor
becomes overheated, the overload protector will shut it down. Should this occur,
allow the motor to cool for 10-15 minutes, then press (never force) the motor
reset switch to restart the motor.
The pump (see B) compresses the air and discharges it into the tank.
The tank (see C) stores the compressed air.
The pressure switch (see D) shuts down the motor
and relieves air pressure in the pump and transfer
tube when the air pressure in the tank reaches the
kick–out pressure. As compressed air is used and the
pressure level in the tank drops to the kick–in pressure,
the pressure switch restarts the motor automatically,
without warning
and the pump
resumes
compressing air.
The air line outlet
(see E). Connect
1/4" NPT air hose
to this outlet.
WARNING
SPECIFICATION CHART
TANK
RUNNING
CAPACITY
H.P.
GALLONS
1.6
20 (75,7)
1.6
30 (113,6)
B
C
VOLTAGE/
AMPS/
PHASE
120/240/
15/7.5/
1
120/240/
15/7.5/
1
A
D
Fig. 1
6- ENG
KICK-IN
KICK-OUT
PRESSURE
PRESSURE
105
(7,24 bar)
(9,31 bar)
105
(7,24 bar)
(9,31 bar)
B
D
C
135
135
A
Publicité
