SmartGyro K2 PRO XL Mode D'emploi page 17

Les langues disponibles

- Respect the rules that affect the use of your skate, especially those of

circulation, it is your responsibility. Pay special attention in dark places.

- Attention: do not use the product near water, nor use it if it is damaged.

- The vehicle is designed to be used by one user. and it has not been desig-

ned to do stunts.

- Minimum recommended user age of 16 years. Maximum user weight: 120 kg.

Minimum and maximum height of the user: 120–200 cm (3'11"–6'6")

- Wear appropriate protective clothing and footwear (helmet, knee pads,

elbow pads, etc. It is mandatory to wear shoes).

- Attention! Any vehicle component is subject to stress and fatigue. If the life

expectancy of a component has been exceeded, it may break, causing

damage and/or injury to the user. If cracks, breaks, or discoloration appear

in the most stressed areas, it indicates that the component has exceeded its

useful life and should be replaced.

- Attention! Keep any plastic out of the reach of children to avoid suffocation.

- Keep the user manual nearby for future reference. Take time to read the

basic indications to avoid accidents that can take place in the first months.

- Avoid areas with a lot of traffic and cross the pedestrian crossing on foot.

- Notify your presence when you approach a pedestrian or cyclist who is not

seeing or hearing you.

- Caution: the brakes may be hot after use. VERY IMPORTANT: do not touch the

disc brake.

- Eliminate any sharp edges.

- Use the parking device (side leg) when you are not using the vehicle.

- Any load on the handlebars can affect the stability of the vehicle.

IMPORTANT:

- Any manipulation or modification of the skate or any of its parts, both software and hardwa-

re, will imply the loss of warranty

- Manipulation to modify the performance of the skate is expressly prohibited by law and may

have legal consequences for the user.

- Make a general check of the fastening of the structure, check the pressure of the wheels and

fill them in if necessary and check from time to time the fastening of the nuts. Due to move-

ment and continuous bumps, they tend to loosen.

If you have any problem with the operation, use or assembly of the product, you can

IMPORTANT