Publicité
Les langues disponibles
Les langues disponibles
EN
Maintenance
• Instructions for cleaning your Smartgyro.
If you want to keep your scooter looking like new, we recommend
cleaning it after each use with a soft, damp cloth (no abrasive
liquids). Then leave it in a place where it can be ventilated avoi-
ding the corrosion of metal parts. When you clean the scooter,
make sure it is turned off, unplugged from power and with the
charging lid closed. You cannot clean the scooter with a pressuri-
zed water hose or submerge it in water since you could seriously
damage it.
• Brake adjustment
The front and rear discbrakes of your Smartgyro K2 PRO XL have
two adjustment points: either through the handlebar brake lever
tensioner or through the brake cable/caliper. In both cases, to be
able to tighten them, you must turn the thread clockwise, and to
loosen them, in the opposite direction.
• Suspension adjustment
The suspensions do not need any kind of adjustment.
•Replace components such as brake pads, wheels, etc.
For this we recommend you enter our website smartgyro.es, go to
any of our official stores and workshops or enter our YouTube
channel to see tutorials @smartGyroOficial.
• Lubrication of important parts:
Add a small amount of grease or specific lubricant to always keep
the front and rear shock absorbers lubricated and all the neces-
sary areas of the scooter periodically from time to time to extend
the life of your scooter and that it is always ready.
REMEMBER:
• Avoid obstacles and anticipate the trajectory and speed respec-
ting the traffic code and the most vulnerable
• In any case take care of yourself and others.
14
Publicité
