LENCO DIR-60BK Mode D'emploi page 7

Note: Below characters are available for the radio:
Numbers(from 0-9)
English letters(from A to Z and from a to z)
Other charcters(DEL,@,Blank,!,",#,$,%,&,*,',+ and (,)
2. WPS PBC network configuration
Select "Yes WPS" when you would like set up with Wireless Network (WPS PBC) feature:
If you are using a router with WPS button, you may set up the network connection simple via WPS
function. Enter it and go to press the WPS button on your router within 120 seconds.
The connection between the router and the Radio will then be configured automatically.
Select "No" when you do not want to install the network at the moment.
3. No network configuration
Pls select "NO" when you do not like to configure the network connection at the moment.
Press "Standby" for standby.When the actual date and time is shown the network is configuration is
well done. Date and time, as well as alarms-if activated-will still be shown on the display when in
standby mode.
4. INTERNET RADIO
Switch on "Standby" and rotate Navigate to scroll through the main menu. Press OK (to enter sub
menus or confirm settings)
Press to return to the previous menu.
After the connection of any station is succeeded, station information's will be shown:
infomation content can be changed with or button.
My Favorites
List of my favorite preset stations. It supports 250 favorite entries including stations and folder.
During the station playing screen, press and hold Fav on the device to save the station as my favorite.
You may replace the previous saved station to the new one.
If the Selected station have been saved, you cannot save it again. The saved stations are showed
under this menu. You may also press Fav to enter the saved station list.
Under the preset station list, move to your station; press OK from unit to listen.
7