Publicité
Les langues disponibles
Les langues disponibles
OPERATING INSTRUCTIONS
TIMER
Auto Off
1. When the air conditioner is turned on, press the
timer button to activate the auto off timer.
2. Press the temperature control buttons to change
the set time in 0.5 hour increments up to 10
hours and then in 1 hour increments up to 24
hours.
Auto On
1. When the air conditioner is turned off, press the
timer button to activate the auto on timer.
2. Press the temperature control buttons to change
the set time in 0.5 hour increments up to 10
hours and then in 1 hour increments up to 24
hours.
The timer will not cycle the air conditioner on and
off indefi nitely. The auto on and auto off timers will
function one time and then the air conditioner will
return to regular operation.
When setting the timer, the display will revert back
to showing the temperature if there is no input
within 5 seconds.
Turn the air conditioner off, set the timer to 0 or
press and hold the timer button for 3 seconds to turn
off the timer.
SHORTCUT
Shortcut can be used to save a favourite setting. Set
the air conditioner to the desired temperature and
fan speed. Press and hold the shortcut button for 2
seconds. Press the shortcut button at any point in
future to return to the favourite setting. Shortcut is
only available on the remote control.
If no shortcut is set, pressing the shortcut button will
set the air conditioner to run in auto mode at 29°C
(79°F), with fan speed set to auto.
SLEEP
The sleep feature can be used to conserve energy
during sleeping hours. This feature can be used
during cool and heat mode. It is not available in dry
or fan mode.
The temperature will increase by 1 degree every
30 minutes for 1 hour. The unit will hold the new
temperature for 7 hours.
The sleep feature can be canceled at any time by
pressing the sleep button.
FOLLOW ME
There is a temperature sensor built into the remote
control that will continuously collect the current
room temperature. Keep the remote control with
you and the appliance will automatically adjust the
set temperature based on the current temperature
where you are located to reach the most
comfortable condition.
Press the follow me button to activate the feature.
The remote will send a signal to the air conditioner
every 3 minutes, so long as you remain within
range of the appliance.
If the appliance does not receive a signal from the
remote during any 7 minute interval, it will beep to
indicate that follow me has ended.
The maximum distance for the follow me feature is
8 meters (26 feet). This feature is available in cool
and auto modes.
18
Publicité
