Initial Use; Important - Beurer ELLE MPE 58 Mode D'emploi

Control panel
1. ON/OFF button
2. Dryer button
3. UV light button
4. "Dryer" operating display
5. "UV light 90 second timer" operating display
6. "UV light 120 second timer" operating display
7. "UV light continuous operation" operating display

3. Initial use

• Check to ensure that the package contains all the parts that should be included in the delivery. If any parts
are missing or damaged, contact Customer Services.
• Remove all packaging material.
• Remove the protective film from the base plate and the inside before using the device for the first time.
Warning
Keep packaging material away from children! Choking hazard.
• Place the device on a firm, level and dry surface.
Before you can begin using the UV nail dryer, you must insert the UV fluorescent tubes.
In order to do this, follow the steps below:
1. Remove the base plate.
3. Insert the base plate.
1
4
2. Carefully insert the fluorescent tubes into the
sockets.

Important

Ensure that the brass terminals are correctly
inserted.
10
2 3
5 6 7