Husqvarna 120iBV Manuel D'utilisation page 9

1. Push the blower tube (A) onto the blower outlet (B).
The interlock (C) engages when you hear a click.
2. Install the blower nozzle (D) onto the blower tube.
The blower nozzle locks in position when you hear a
click.
To assemble the intake cover
Note:
When the intake cover is not assembled
correctly, a safety switch will prevent the blower from
starting.
• Close the intake cover (A) on the blower inlet (B).
The interlock (C) engages when you hear a click.
Vacuum mode
WARNING:
and the collection bag fully before you use
the product in vacuum mode.
2034 - 004 - 20.10.2023
Assemble the vacuum tube
To assemble the vacuum tube
WARNING:
lower vacuum tubes before you start the
product.
Note:
When the vacuum tube is not assembled
correctly, a safety switch will prevent the vacuum from
starting.
1. Align the slots on the upper vacuum tube (A) with the
tabs on the lower vacuum tube (B).
A
C
2. Push the lower vacuum tube onto the upper vacuum
tube until you hear a click.
3. Tighten the screw (C) .
4. Install the vacuum tube (D) to the vacuum inlet (E).
The interlock (F) engages when you hear a click.
F
D
To assemble the collection bag
Note:
If the collection bag is not assembled correctly,
a safety switch will stop the product start procedure.
WARNING:
attaching or removing the bag.
Assemble the upper and
B
E
Stop the machine before
9