KEUCO Edition 400 11596 171551 Instructions D'utilisation page 3

US
Read all instructions before using or installing this product.
Technical data
– Supply voltage:
– Required electrical outlet:
– Max. power consumption:
Prod. No.:
11596 171551 27-15/16" 19.0 lb
11596 172051 41-12/16" 26.9 lb 19.5 W
11596 172551
– Degree of protection:
– Ambient conditions:
Operating temperature
Storage temperature
– Luminous color
Mounting dimensions, see page 10.
Installation, see fi gure 1a/1b onwards on page 11.
Before installation check whether the fastening materials
included are suitable for the anchoring base. The fas-
tening materials are suitable exclusively for stud walls
with timber constructions or for drywall constructions with
timber wood reinforcement.
• Mark the wall bracket position, see fi gure 1a/1b.
• Mount the wall brackets to the wall, see fi gure 2 on
page 12.
• Mount the light mirror fi xation, see fi gure 3.
WARNING - GROUNDING
INSTRUCTIONS
This product must be connected to a grounded me-
tal, permanent wiring system, or an equiment-groun-
ding conductor must be run with the circuit con-
ductors and connected to the equipment-grounding
terminal or lead on the product.
Wiring diagram, see fi gure 4 on page 12.
The mirror can be optionally actuated similar to
a toggle switch with a button on the mirror (A) or
with an external light switch (B).
120 V AC / 50/60 Hz
15 A / 1800 VA
Width Weight Light
41 W
55-1/2" 34.2 lb 26 W
NEMA 1
32° – 113° F
-40° – 158° F
2700 – 6500 Kelvin
B
A
• Connect the light mirror to the power supply,
see fi gure 5a/5b on page 13.
• Remove the adhesive cover from the light mirror
fi xation, see fi gure 6.
• Hang the light mirror on the wall from above,
Heating
see fi gure 7.
41 W
65 W
• Press the light mirror to the light mirror fi xation,
see fi gure 8.
90 W
Operation
Button functions
Button Function
Light on/off
• Pressing the button switches the light mirror
• Pressing the button again switches the light
Dimming the lighting
• Press the button when the light mirror is
The setting is stored and reproduced when
switched on again (only for connection type 1,
see fi gure 4 on page 12).
Setting the light colour cooler
• Press and hold daylight white button and the
• Release when the desired light colour has
The setting is stored and reproduced when
switched on again (only for connection type 1,
see fi gure 4 on page 12).
Adjusting light colour - daylight white (cool
white)
• Press button and the colour temperature sets
Setting the light colour warmer
• Press and hold warm white button and the
• Release when the desired light colour has
The setting is stored and reproduced when
switched on again (only for connection type 1,
see fi gure 4 on page 12).
Adjusting light colour - warm white
• Press button and the colour temperature sets
on with the selected settings. The white LED
goes off.
mirror off. The white LED lights up.
switched on and hold until the desired bright-
ness or the end value has been reached.
light colour fades to cool white.
been reached.
to 6500 Kelvin.
light colour fades to warm white.
been reached.
to 2700 Kelvin.
3