CASO DESIGN SteamMaster E 56 Manuel D'instructions page 62

14.2.2 Regular Cleaning
Danger of fire
► Always remove grease residues in the device, as these residues can otherwise
ignite.

Clean the device and its accessories regularly. You can remove the rails for this. Then
wipe the device including the cooking chamber with a damp cloth. If the device is very
dirty, a mild cleaning agent can be used.

In particular, clean the door gasket regularly so that the door closes properly.

Clean the accessories, especially the water tank, with water and a mild detergent, then
rinse them with fresh water and dry the accessories.
14.2.3 Before and after long periods of non-use
It is important that you clean the device thoroughly before it is not going to be used for a
long period and, in particular, that you dry the water tank thoroughly. If you then want to
use the device again, first proceed as described under "First use".
14.2.4 Descaling / cleaning function
Depending on the hardness of the water, you should descale the device every 6-8 weeks.
The integrated descaling reminder
the device will beep.
You can end the alarm by pressing any button. But you will be reminded again the next
time you use the device. The warning is only reset once you have used the descaling /
cleaning function.
1. Remove the water tank. Fill it with a mixture of water and citric acid (5%). Put the
water tank back in.
2. Select the descaling / cleaning function
displayed.
3. When int the display
tank. Put the tank back in and confirm with
4. The limescale residues are flushed into the interior of the device. When the device
displays "END", the process is complete.
5. Wait until the device has cooled down and then clean the inside of the device.
14.2.5 Removal of the door

You can clean the door with a mild detergent and water.

The door can be removed for better cleaning.
also reminds you by flashing in the display and
flashes and the device beeps, then add fresh water to the
and confirm with
. C02 is now displayed.
. C01 is now
62