Publicité
Les langues disponibles
Les langues disponibles
USE & TIPS
"COLD AREA" indicator
The sign opposite can be found in your fridge.
It clearly shows the coldest zone of your appliance, where the temperature is lower than
or equal to +4°C.
A temperature gauge in this zone allows you to check the settings of your fridge.
Adjust the thermostat
Temperature correct
ok
Warning!
If the door of the fridge is left open for too long, the temperature inside the fridge will rise. Check the
temperature gauge within 30 seconds after opening the door to make sure that the reading is correct.
Adjusting the temperature
Display
Once initially powered on, all LED lights turn on for 2 seconds, and then the refrigerator runs at the
default setting (LED3 light is on).
In case of no failures, it shows the actual temperature setting of refrigerator. In case of a failure, the
corresponding LED blinks.
The fault code display will disappear after 30min. if you need to re-display the fault code, please
disconnect the power supply and then power it back on.
Fault Code
LED1 / LED3 flashing
LED1 / LED2 / LED4 flashing
Fault Description
Ambient temperature sensor fault
Refrigerating defrost sensor fault
Publicité
