Selecting Units Of Measurement; Resetting Data - ADVANSEA SPEED S400 Manuel Utilisateur

2.2.2. Selecting units of measurement

To change the unit of measurement for some data, press at least 2 seconds on the
or key.
The following table summarizes the various units displayed according to the data
selected:
In bold, default units.

2.2.3. Resetting data

To reset the average speed and max speed data on the upper line, first display the
parameter to be reset to 0 and press simultaneously at least 2 seconds on the
keys.
To reset the average speed, max speed, Trip log and Total log data on the lower line,
first display the parameter to be reset to 0 and press simultaneously at least 2 seconds
on the +
Data
Water temperature
Timer
Battery voltage
Speed over ground
Surface speed
Average speed
Max speed
Trip log
Total log
keys.
LCD label
TEMP
CHRONO
BAT
SOG
SPEED
AVG SPEED
MAX SPEED
LOG
TOTAL LOG
Installation and Operation Manual S400 series
Units
°F
V
KNOTS KPH
NM KM
+
°C
MPH
8