Components Supplied With Your Speed S400; Technical Characteristics - ADVANSEA SPEED S400 Manuel Utilisateur

To do so, it is supplied with 2 connection cables:
1 connector-free cable for the power supply, the bus, the NMEA IN & OUT, the alarm
output
1 LT8 cable for connection to the speedometer sensor
The Speed S400 is part of the S400 advanSea family of navigation instruments,
including instruments for measuring speed, depth, and wind. They may be connected
together to form an integrated data system for a boat (see chapter 2.6).
1.2. Components supplied with your Speed
S400
The Speed S400 comes with (as standard):
-
-
-
-
The Speedi S400 does not come with sensors. You can order complete kits, or
consult our website www.advanSea.com.
You will also find a complete list of accessories at

1.3. Technical characteristics

Measurement characteristics
Speed:
Trip log:
Total log:
Battery voltage:
protective cover
user manual
warranty card
adhesive rear sealing joint for flush mounting
Measurement range: from 0.0 to 60.0 knots
Speed ratio: fixed at 6.1 Hz/knots
Accuracy: ±1.0 knots up to 20.0 knots and ±5% beyond 20.0
knots.
Resolution: 0.01 from 0 to 19.99 and 0.1 beyond
Calibration possible on 2 measurement points (Slope and Offset)
Measurement range: from 0 to 655 kilometres
Resolution: 0.01 from 0 to 19,99
and 0,1 from 20,0 to 199,9
and 1 beyond
Measurement range: from 0 to 1999 kilometres
Resolution: 1
Measurement range: from 10.0V to 16.5V
Accuracy: ±0.2V
Resolution: 0.1V
Installation and Operation Manual S400 series
www.advanSea.com
5