Setting The Battery Alarm Threshold; Configuration - ADVANSEA SPEED S400 Manuel Utilisateur

menu
Press , then once again on
the speedo, then adjust the required value of the threshold using the
keys.
Press to exit setup mode, or time out after 10 seconds.

2.3.2. Setting the battery alarm threshold

The battery alarm allows you to monitor the supply voltage to your installation.
menu
Press , then once again on
adjust the required value of the threshold using the
Press to exit setup mode, or time out after 10 seconds.

2.4. Configuration

To identity the data that can be configured, the SPEED unit will alternatively display
the data name and its current value (every 2 seconds). When changing the setting
value, the data will be fixed on the display.
menu
to display the "SPEED Lo" low threshold page for
2 seconds
menu
to display the "bAt" low threshold page, then
2 seconds
Installation and Operation Manual S400 series
and keys.
and
11