Publicité
Les langues disponibles
Les langues disponibles
en-us_main.book.book Page 32 Thursday, March 14, 2024 10:35 AM
32 OPERATION
2
Use the Power Level button to set the desired
amount of time. After 3 seconds, the timer will
start.
• Timer can be adjusted from 0 to 99 minutes.
• If no time is entered for 25 seconds, the
timer will turn off.
3
To cancel the timer setting, press the Timer
button.
WARNING
• The Timer function does not automatically turn
off the cooktop or cooking zones. Be sure to
press the POWER button to turn the cooktop off
after cooking.
Automatic Power Level Control
The power level displayed may be different from
the actual power level at the high end of the
temperature range. To prevent the cooktop from
overheating, the power level is controlled
automatically.
NOTE
• Power Cycling
- It is normal for heating elements to cycle On/
Off during use to control output power.
Cookware Compatibility Indicator
The cookware compatibility indicator can be used
to determine if a container will heat well on an
induction cooking zone.
• The compatibility indicator may vary due to
conditions such as voltage, cookware size, or
cookware temperature. Use cookware with a
bottom diameter that is suitable for the size of
the cooking zone.
• The compatibility indicator may vary depending
on the cooking zone.
• The cookware compatibility indicator displayed
on this product is based on internal
manufacturer standards. Environmental
conditions may cause inaccurate or variable
results. Use the results only as a reference point.
Using the Compatibility Indicator
1
Place the cookware on the cooking zone you
want to use and set the output level to 9.
2
Press and hold the corresponding cooking
zone button and Control Lock to display the
cookware compatibility indicator. The
cookware compatibility indicator turns off
after 3 seconds.
Indicator
0 - 3
4 - 8
9 - 10
• The higher the indicator, the better the
cookware heats up (rated from 0 to 10).
• If the indicator is low, check the material, size
and shape of the cookware base.
- Even if the cookware has an IH mark, if the
indicator is low it may not heat properly on this
appliance.
- If the cookware size does not properly match
the element size, the indicator may be low. Try
again with a different size element.
Compatibility
Low
Medium
High
Publicité
