Reverse door
This refrigerator can be opened either from the left or right side�
The default way of opening the door is from the right left� If you
want to open the door from the left side, please follow the in-
structions below�
Tools Required: Phillips style screwdriver / Flat blated screwdriver
/ Hexagonal spanner
•
If you want to have the door swing reversed, we recommend
that you contact a qualified technician� You should only try to
GB
reverse the door yourself if you believe that you are qualified
to do so�
•
Ensure the unit is unplugged and empty�
•
Adjust the two levelling feet to their highest position�
•
To take the door off it is necessary to tilt the unit backwards�
You should rest the unit on something solid so that it will not
slip during the door reversing process�
•
All parts removed must be saved to do the reinstallation of
the door�
•
The refrigerator inclination angle should be less than 45°�
17
•
Do not lay the unit fat as this may damage the coolant sys-
tem�
•
You should rest the Appliance on something solid e�g� a chair
just below the top panel�
•
We recommend that 2 people handle the unit during assembly�
Follow the following stages to reverse the door from its initial
position�
DEPOSIT DOORS
1� Unscrew top hinge cover and then screw the top hinge�Then
lift upper door and place it on a soft pad to avoid scratch and
damage�
2� Remove the pin with a screw driver and flip the hinge brack-
et� Then refit the pin to hinge bracket�
GB
18