Publicité
Les langues disponibles
Les langues disponibles
Description of the device
Freezer
Shelf
Thermostat
GB
and light
Glass Shelves
Crisper Cover
Crisper
1.Above picture is for reference only. Real appliance probably is different.
2.Drawers, food boxes, shelves, etc. placed according to the position in the picture above
are the most energy efficient.
7
Installation
Position the appliance and allow it to stand for two to three hours
before it is turned on for the first time to allow the system to set-
tle� Do not position next to any heat source e�g� cooker, boiler or
in direct sunlight etc�
Allow at least 10 cm of space at the top and 10 cm of space on
both sides of the appliance and between the back of the appli-
ance and the wall for adequate air circulation� The appliance is
Balconies
not designed for recessed installation ("building in")�
Install on a good firm level surface, and any unevenness of the
floor should be corrected prior to installation, slight unevenness
can be overcome by adjusting the front feet�
NOTE: If the appliance is positioned on a carpet, soft floor cover-
ing you should readjust the front feet once the appliance has had
time to settle�
GB
8
Publicité
