Redfox SPT 70/80 11 GE Notice D'installation Et D'emploi page 35

CLEANING AND MAINTENANCE CLEANING AND MAINTENANCE
It is recommended to have the device checked by the professional service min. once a year. All interventions
must be done by qualifi ed person who is competent for this.
ATTENTION!
The device cannot be cleaned by direct or pressure water. Clean it daily. Daily maintenance keeps longer
useful life and effi ciency of the device. Before cleaning make sure to have disconnected the device from
electricity. Always switch off the main feeder to the device. Stain-less parts wash with moist cleaning cloth
CLEANING AND MAINTENANCE
and detergent without groove parts than wash it with clean water and dry it by the cloth. Do not use abrasive
and corrosive detergents.
It is recommended to have the device checked by the professional service min. once a year. All interventions
WHAT TO DO IN CASE OF BREAK-DOWN
must be done by qualifi ed person who is competent for this.
Switch off the electric feeder and call seller´s proffesional service.
ATTENTION!
INDICATION:
The device cannot be cleaned by direct or pressure water. Clean it daily. Daily maintenance keeps longer
useful life and effi ciency of the device. Before cleaning make sure to have disconnected the device from
Guarentee does not cover all consumption parts succumable to common wear (rubber seals, bulbs, glas and
electricity. Always switch off the main feeder to the device. Stain-less parts wash with moist cleaning cloth
plastic parts etc.). The guarantee does not refer to the devices which were not instaled in correspondance with
and detergent without groove parts than wash it with clean water and dry it by the cloth. Do not use abrasive
instructions - by qualifi ed worker, in confi rmity with standards and when somebody handled incompetently the
and corrosive detergents.
device (interventions into inner equipment) or the device was operated by nonqualifi ed staff or at variance
with instructions for use. Guarantee does not also cover the damages caused due to infl uance of nature or
WHAT TO DO IN CASE OF BREAK-DOWN
other outer intervention.
Switch off the electric feeder and call seller´s proffesional service.
INDICATION:
Point for cleaning steel-alloy plate:
• Heat up the device
Guarentee does not cover all consumption parts succumable to common wear (rubber seals, bulbs, glas and
• Turn of the device
plastic parts etc.). The guarantee does not refer to the devices which were not instaled in correspondance with
• The plate pull off with scraper
instructions - by qualifi ed worker, in confi rmity with standards and when somebody handled incompetently the
• Apply water to chemistry (RM gril) and clean the plate from residual dirt and sediment
device (interventions into inner equipment) or the device was operated by nonqualifi ed staff or at variance
• Apply pure water (The solution is with vinegar or lemon)
with instructions for use. Guarantee does not also cover the damages caused due to infl uance of nature or
• Pull off the water and than to dry the plate with rag
other outer intervention.
• Turn on the device up to 70 °C and from the plate let evaporate residual humidity
• To smear the grill areas with vegetable oil
Point for cleaning steel-alloy plate:
• Heat up the device
• Turn of the device
Point for cleaning chrome plate:
• The plate pull off with scraper
• Heat up the device
• Apply water to chemistry (RM gril) and clean the plate from residual dirt and sediment
• Turn of the device
• Apply pure water (The solution is with vinegar or lemon)
• The plate pull off with plastic scraper
• Pull off the water and than to dry the plate with rag
• Apply water with a saponate and clean the plate with a sponge
• Turn on the device up to 70 °C and from the plate let evaporate residual humidity
• Apply pure water
• To smear the grill areas with vegetable oil
• Pull off the water and than to dry the plate with rag
• Turn on the device up to 70 °C and from the plate let evaporate residual humidity
Point for cleaning chrome plate:
• Heat up the device
• Turn of the device
• The plate pull off with plastic scraper
• Apply water with a saponate and clean the plate with a sponge
• Apply pure water
• Pull off the water and than to dry the plate with rag
• Turn on the device up to 70 °C and from the plate let evaporate residual humidity
35