Redfox SPT 70/80 11 GE Notice D'installation Et D'emploi page 32

CHECK THE GAS TYPE THE DEVICE IS ADJUSTED FOR (oven)
CHECK THE GAS TYPE THE DEVICE IS ADJUSTED FOR
CHECK THE GAS TYPE THE DEVICE IS ADJUSTED FOR
Our appliances are certifi ed and regulated the natural gas (see technical plate). Conversion or
adaptation to a different type of gas must be performed by authorized personnel. Nozzles for diffe-
Our appliances are certifi ed and regulated the natural gas (see technical plate). Conversion or
rent types of gas are in a bag provided with the gas cooker and are marked in hundredths of mm
adaptation to a different type of gas must be performed by authorized personnel. Nozzles for diffe-
rent types of gas are in a bag provided with the gas cooker and are marked in hundredths of mm (table of technical data pipes).
(table of technical data pipes).
Instructions:
Instructions:
Main burner
Main burner
1) Open the oven door and take out the cover sheet. (false bottom of oven).
1) Open the oven door and take out the cover sheet. (false bottom of oven).
2) Dismount the cover of main burner (fi g. 2)
2) Dismount the cover of main burner (fi g. 2)
3) According to picture (fi g. 3) unscrew the nozzle from the main burner and replace with nozzles
3) According to picture (fi g. 3) unscrew the nozzle from the main burner and replace with nozzles
according to table „TECHNICAL DATA"
according to table „TECHNICAL DATA"
4) Adjust the air intake for the relevant gas according to table „TECHNICAL DATA"
4) Adjust the air intake for the relevant gas according to table „TECHNICAL DATA"
Pilot burner
Pilot burner
1) Unscrew the nut according to pic. 5, pos. 1
1) Unscrew the nut according to pic. 5, pos. 1
2) Disassemble the copper supply pipe from the pilot burner.
2) Disassemble the copper supply pipe from the pilot burner.
3) unscrew the nozzle from the main burner according to pic. 5, pos. 2 and replace with nozzles
3) unscrew the nozzle from the main burner according to pic. 5, pos. 2 and replace with nozzles
according to the "BURNER TECHNICAL DATA" table.
according to the "BURNER TECHNICAL DATA" table.
4) Reinstall the copper pipe to the pilot burner and attach using the nut according to pic. 5, pos. 1.
4) Reinstall the copper pipe to the pilot burner and attach using the nut according to pic. 5, pos. 1.
5
5
pos. 1
pos. 1
pos. 2
pos. 2
32
1
1
(oven)
(oven)
2
2
3
3
NOZZLE
4
NOZZLE
4