Johnson JCRL10B Guide D'utilisation page 20

How to Use Basic Functions
Basic operation
ATTENTION! Before operation,
please ensure the unit is plugged in
and power is available.
1
3
COOL Mode
1. Press the MODE button to select
COOL mode.
2. Set your desired temperature
using the TEMP
button.
3. Press FAN button to select the
fan speed in a range of AU-100%.
4. Press the ON/OFF button to start
the unit.
2
or TEMP
SETTING TEMPERATURE
The operating temperature range for
units is 16-30°C
(68-82ºF). You can increase or decrease
the set temperature in 1°C (1°F) incre-
ments.
AUTO Mode
In AUTO mode, the unit will automatically
select the COOL, FAN or HEAT operation
based on the set temperature.
1. Press the MODE button to select AUTO.
Set your desired temperature using the
2.
TEMP or TEMP
Press the ON/OFF button to start the
3.
unit.
NOTE: FAN SPEED can't be set in AUTO
mode.
1
4
3
7
(60-86°F) / 20-28ºC
button.
V.1
2