Johnson JCRL10B Guide D'utilisation page 22

Setting the TIMER
TIMER ON/OFF - Set the amount of time after which the unit will automatically turn on/off.
TIMER ON setting
Press TIMER button to
initiate the ON time
sequence.
TIMER OFF setting
Press TIMER button to
initiate the OFF time
sequence.
NOTE:
1. When setting the TIMER ON or TIMER OFF, the time will increase by 30 minutes increments
with each press, up to 10 hours. After 10 hours and up to 24, it will increase in 1 hour increments.
(For example, press 5 times to get 2.5h, and press 10 times to get 5h,) The timer will revert to 0.0
after 24.
2. Cancel either function by setting its timer to 0.0h.
TIMER ON & OFF setting (example)
Keep in mind that the time periods you set for both functions refer to hours after the current time.
xn
Timer starts
Current
2:00PM
time 1PM
2.5 hours later
5 hours later
Press Temp. up or down but-
ton for multiple times to set
the desired time to turn on the
unit.
x5
Press Temperature up or down
button for multiple times to set
the desired time to turn off the
unit.
x10
Unit turns
ON
3:30PM 4PM
3:00PM
Point remote to unit and wait
1 sec, the TIMER ON will be
activated.
Point remote to unit and wait
1sec, the TIMER OFF will be
activated.
Unit turns
OFF
Example: If current timer is
1:00PM, to set the timer as
above steps, the unit will turn
on 2.5h later (3:30PM) and turn
off at 6:00PM.
5PM 6PM
9
1
sec
1
sec
xn
V.1