Johnson JCRL10B Guide D'utilisation page 23

How to Use Advanced Functions
Swing function
Press Swing button
Swing
The horizontal louver will swing up and
down automatically when pressing Swing
button. Press again to make it stop.
Airflow direction
Swing
NOTE: When the unit is off, press and hold MODE and SWING buttons together for one
second, the louver will open for a certain angle, which makes it very convenient for
cleaning. Press and hold MODE and SWING buttons together for one second to reset
the louver (Model dependent).
LED DISPLAY
Press LED button
LED
Press this button to turn on and
turn off the display on the indoor
unit.
2s
Swing
Keep pressing this button more than 2
seconds, the vertical louver swing
function is activated. (Model dependent)
If continue to press the SWING button,
five different airflow directions can be set.
The louver can be move at a certain
range each time you press the button.
Press the button until the direction you
prefer is reached.
5s
LED
Keep pressing this button more than 5
seconds, the indoor unit will display the
actual room temperature. Press more than
5 seconds again will revert back to display
the setting temperature.
10
Press this button more
than 5 seconds(some
units)
V.1