Urmet YOKIS 1083/85 Manuel D'installation Et D'utilisation page 9

• Enter the correct password and select
By selecting the icon
functions.
The screen below shows the display when Yokis Home Automation has been enabled by selecting the ON
icon.
• Select to assign names to the scenarios.
• Icons will not be shown if the bus is set to OFF.
A supplementary ringer connected to the S+/S- terminals cannot be used if the bus is set to ON.
On the other hand, the fl oor call function which uses one of the terminals CP+/CP- will still be
available (see system diagram).
Touch to scroll the scenario name list.
DS1083-069A
All manuals and user guides at all-guides.com
0 1 2
to access the required menu.
(*) Icons not to be used
you will access the menu from which to enable or disable Yokis Home Automation
BUS
(*) The icon
RELAX
1
SCENARIO 2
2
ASSENZA
3
< >
4
< >
5
PASSWORD
- - - -
3 4 5 6 7 8
*
OFF
ON
*
should not be used.
9
9