Siemens DHI 945 F Mode D'emploi Et Notice De Montage page 18

Operating the extractor hood
Cooking vapours are best eliminated
by:
Switching on the extractor hood when
you start cooking.
Only switching off the extractor hood
a few minutes after you have finished
cooking.
Fan on / off
Fan settings
Intensive setting
Fan on / off
Fan settings
Intensive setting
Switching on:
Take hold of filter drawer handle and pull
out the drawer.
Select the required fan setting.
18
Light
on / off
Light
on / off
Reset button with
saturation display
for grease filter
Switching off:
The extractor hood can be switched off in
various ways.
Switch-off 1:
Sliding switch to 0 – switch off fans.
Switch-off 2:
Push in filter drawer to stop. (Sliding
switch remains as selected).
To switch on the extractor again, just
pull out the filter unit.
The extractor hood will start at the most
recent fan setting.
Light:
The light can be switched on at any time
even when the appliance is off or the filter
drawer is inserted.
Faults
If you have any queries or the appliance is
faulty, please call customer service
(see list of customer service units).
Please give the following details when you
call:
Product no. (E-Nr.) Serial no. (FD)
Enter the numbers in the above box. The
numbers can be found on the rating plate
inside the extractor hood following removal
of the filter screen.