Steba VT S6 Mode D'emploi page 19

Functions
With the rotary switch you can choose different types of wind speed:
0 – Off
1 – low air flow
2 – medium air flow
3 – high air flow
The oscillation can be activated by pulling the handwheel on the motor part. By
pushing it in again, the oscillation is deactivated.
Height adjustment:
by loosening the screw, the height of the fan can be changed.
Inclination:
The angle of inclination can be adjusted upwards and downwards. To do this, hold
the device on the standpipe and gently swivel the motor block to the desired position.
Attention! Only press on the motor block, not on the grid!
19