SPIT AGP 230AV Notice D'emploi Et D'entretien page 17

After mounting the grinding disc and before switching on the machine, check that
the grinding tool is correctly mounted and that it can run freely.
Switching the machine on and off
To switch on
To start the machine, press the on/off switch forward and then down (1)
The safety button on the switch ensures that it is not accidentally switched on.
To switch off
Release the on/off switch (2)
HOW TO USE THE TOOL
Effective control of this powerful tool requires two-handed operation for maximum safety
and control.
The proper position is to keep one hand on the main handle and the other hand on the
auxiliary handle or D-handle. It is vitally important to keep stable footing at all times,.
Mounting the D-handle
Unplug the machine (1)
Place the handle in the desired position and tighten the 2 thumb screws (2)
AGP_AGS_A5_part1.indd 13
1
1
2
2
GB
13
18/02/09 10:48