SPIT AGP 230AV Notice D'emploi Et D'entretien page 13

INTENDED USE
The AGP 230AV is intended for cutting metal and stone materials and for roughing
stone materials without using water.
The AGS 230M is intended for cutting metal and stone materials without using water.
For cutting stone, a cutting guide is required.
FUNCTIONAL DESCRIPTION
Before use
The network voltage must conform to the voltage indicated on the nameplate of the tool.
Because the tool falls into Class II category, under normal usage it does not need to be
specially earthed.
Under no circumstances should the tool be used when the power supply cable is
damaged. The use of a damaged power cables can lead to an electric shock.
Check, and if necessary, clear the air-slots for proper ventilation.
Handgrip
For safety purposes, the machine must always be used with the side handgrip placed in
one of the 3 fixed positions (1), or the safety-guard handgrip / locked handgrip with the
2 supplied fixing nuts (2).
AGP_AGS_A5_part1.indd 9
1 2
GB
9
18/02/09 10:48