lead. Do not connect the probe ground lead
to any point which is at a potential other
than earth ground.
Use only on test instruments where the
chassis or return lead is properly
grounded.
Use only in office-type indoor setting
The instrument is designed to be used in
office-type indoor environments. Do not
operate the instrument:
Use in an indoor Pollution Degree 2
environment. Measurements made by this
instrument may be outside specifications if
the instrument is used in non-office-type
environments. Such environments may
include rapid temperature or humidity
changes, sunlight, vibration and/or
mechanical shocks, acoustic noise,
187
• In the presence of noxious,
corrosive, or flammable fumes,
gases, vapors, chemicals, or finely-
divided particulates.
• In environments where there is a
danger of any liquid being spilled
on the instrument.
• In air temperatures exceeding the
specified operating temperatures.
• In atmospheric pressures outside
the specified altitude limits or
where the surrounding gas is not
air.
www.
.com
4
information