Publicité
Les langues disponibles
Les langues disponibles
Do not apply to the input any potential
that exceeds the maximum rating of the
probe.
For your own safety, inspect the probes
for cracks and frayed or broken leads
before each use. If defects are noted, DO
NOT USE the probe.
Hands, shoes, floor and work bench
must be dry.
Avoid making measurements under
humidity, dampness or other
environmental conditions that might affect
safety.
Turn the high voltage source off before
connecting or disconnecting the probe
whenever possible.
The probe body should be kept clean
and free of any conductive contamination.
Do not remove the probe casing.
Removal of the probe's casing may expose
you to electric shock.
Keep fingers behind the probe's finger
guard during use.
Always properly ground the probe with
the lead before contacting high voltage
circuits with the probe tip. Always
disconnect the probe tip from high voltage
circuits before disconnecting the ground
3
187
information
www.
.com
Publicité
