Kärcher NT 55/1 Tact Te M Mode D'emploi page 18

Device elements
1 Electrodes
2 Suction hose
3 Air outlet, working air
4 Suction head lock
5 Air inlet, motor cooling air
6 Suction head
7 Dirt receptacle
8 Connection bushing
9 Steering roller bow
10 Steering roller
11 Suction support
12 Floor nozzle
13 Suction tube
14 Rotary switch for suction hose cross
section
15 Cable hook
16 Filter cover
17 Carrying handle
18 Push handle
19 Scale of the suction hose cross section
20 Bender
21 Rotary switch for suction output (min-
max)
22 Indicator lamp
23 Socket
24 Automatic filter dedusting
25 Main switch
26 Flat fold filter
27 Filter dedusting
28 Floor nozzle holder
29 Drain hose
30 Holder for suction pipes
31 Holder for crevice nozzle
32 Power cord
33 Nameplate
18
Symbols on the machine
M
WARNING: This unit contains hazardous
dust. Emptying and maintenance, includ-
ing the removal of the dust bag, may only
be carried out by someone who is familiar
with the unit and wearing suitable protec-
tive gear. Do not switch on the unit until the
complete filter system has been installed
and the function of the volume-flow control
has been tested.
PES
PTFE
Safety instructions
DANGER
– When the outgoing air is carried back
into the room, a sufficient ventilation
rate L in the room must be ensured. To
comply with the required limit values the
carried back volume flow must be 50%
of the fresh air volume flow (room vol-
ume V x ventilation rate L
R
mum. Without a specific ventilation sys-
tem the following applies: L
– Only persons trained in the use of the
machine and the handling of substanc-
es for which the machine is to be used
including training in the safe disposal of
the sucked-in material may use the ma-
chine.
– 2
EN
!
Flat fold filter
Order No. 6.904-367.0
Flat fold filter (PES)
Order No. 6.904-360.0
Flat fold filter (PTFE)
Order No. 6.907-455.0
Dust disposal bag
Order No. 6.596-886.0
) at maxi-
W
=1h
W
M
.
–1