Publicité
Les langues disponibles
Les langues disponibles
To Clean Hood Surface
•
For general care, wipe the outside of the stain-
less steel with sudsy water or household
cleaners such as Fantastic
rinse well and dry with a clean soft cloth to avoid
water marks.
•
Wipe and dry stainless steel in the same
direction as the grain. Avoid using too much
pressure, which may mar the surface.
•
Do not use abrasive products such as steel
wool.
•
To remove finger prints and give added shine,
use spray cleaners such as Stainless Steel
Magic
®
and Shimmer
•
Do not allow any cleaning compounds to remain
in contact with stainless steel for extended
periods.
The use of brand names is intended only to indicate
a type of cleaner. This does not constitute an
endorsement. The omission of any brand name
cleaner does not imply its adequacy or inadequacy.
Many products are regional in distribution and can
be found in the local markets. It is imperative that all
products be used in strict accordance with instruc-
tions on the package.
To Clean Filters and Troughs
Your hood has removable aluminum filters, grease
troughs and side panels. They must be cleaned
when the filter light illuminates on the control panel
or whenever they collect grease. When used over a
grill, wok or other high grease applications, more
frequent cleaning may be required.
To Remove Filters and Grease
Troughs:
•
Turn the fan and lights off. Be sure filters are
cool and grease has congealed before removal.
•
Remove in the following order:
1. Filters -Start with center filters, push
up, then pull out from the bottom.
2. Side Panels - Remove these the same
way as the filters.
3. Grease Troughs - lift up and out.
•
The filters and grease troughs can be washed
by hand or in the dishwasher. The side panels
may be washed with warm soapy water and
polished with stainless steel cleaner.
Reverse the above directions to reinsert the trough,
filters and side panels.
CARE AND CLEANING
®
or Formula 409
®
,
®
.
PAGE 6
1
2
3
OFF
DELAY
A A
FAN
FILTER
SHUT OFF
SPEED
Figure 2
Note: Do not use cooktop while hood is disas-
sembled. Grease troughs must be in place before
installing the aluminum filters.
1
2
Filters
Side Panel
Filters
Grease Trough
Figure 3
Note: Depending upon the size and model of hood,
there will be anywhere from 1 to 3 filters per hood.
®
R
L
LIGHT
HEAT LAMPS
A A
L L
1
2
Side Panel
Publicité
