OPERATING INSTRUCTIONS
CONTROL PANEL
2
1
7
8
9
1. Power button: Used to turn the appliance on or
off.
2. Mode button: Used to choose the operating
mode.
3. Up and down arrows: Used to adjust the set
temperature and the timer function.
4. Follow me indicator light: Illuminates when the
follow me function is active. Follow me can only
be set from the remote control.
5. Display panel: Displays the set temperature, the
ambient temperature and the timer settings. To
change the temperature scale being displayed,
press the up and down buttons at the same time.
6. Fan button: Used to set the fan speed.
7. Wireless connect button: Used to connect to a
wireless network.
8. Energy saver button: Used to set the energy
saver function.
9. Filter button: The indicator light will illuminate
as a reminder to check the fi lter. Once the fi lter
has been cleaned, use this button to resume
operation.
10. Sleep button: Used to set the sleep function.
11. Timer button: Used to set the automatic timer.
4
3
6
5
10
11
REMOTE CONTROL
1
2
3
1. Mode button: Used to choose the operating
mode.
2. Energy saver button: Used to set the energy
saver function.
3. Follow me button: Used to set the follow me
function.
4. Sleep button: Used to set the sleep function.
5. LED button: Press to turn the LED back light on
or off.
6. Clock button: Press and hold the button for 3
seconds in order to set the clock. Press the up
and down arrows to adjust the time in 10 minute
intervals
Note: The clock feature is only available on the
remote, the appliance does not have a clock. The
remote clock is a 24 hour clock only.
7. Cancel button: Cancels current timer settings.
8. Timer button: Used to set the automatic timer.
9. Fan button: Used to set the fan speed.
10. Up and down arrows: Used to adjust the set
temperature and the timer function.
11. Default button: Press to restore the remote
control default settings.
12. Lock button: Press this button to lock the remote
control and prevent the settings from being
inadvertently changed.
10
9
8
10
7
11 12
6
4
5