Publicité
Operating Instructions:
Control Panel on the Front of Unit
1. Power
2. Heater
1. On/Off Main Power Button
2. Heater Button
a. Press to switch the heater on/off.
3. Flame/Log
(1) Adjust the flame/Log brightness level: L3 - L2 - L1 - OFF (L3 being the brightest and L1 the
dimmest)
Note: When heater/fan is on, the flame/log can't be switched off
ELECTRICAL CONNECTION:
A 12.5 AMP, 120 Volts, 60 Hz circuit with a properly grounded outlet is required. It's recommended that the fireplace be on a
dedicated circuit, as other appliances on the same circuit may cause the circuit breaker to trip or blow the fuse when the
heater is in operation.
11 |
3. Flame/Log
ELECTRICAL SPECIFICATIONS
Voltage:
Amps:
Watts:
Lighting:
120VAC, 60 Hz
11.7Amps
1400 Watts
LED
Publicité
