Panasonic ER-GN3 Manuel D'utilisation page 8

. With the power switch still
set to the "1" position, place
the tip of the blade into
water and rinse thoroughly.
• Water will jet out from the
rear side of the appliance,
so point it downward in
order to not wet the
surroundings.
▼
. Wipe off the water with a towel or
similar, and let it dry naturally.
• It will dry faster with the blade
removed.
Brushcleaning
1. Make sure the power switch is in
the "0" position.
. Remove the blade, and lightly
brush off the trimmings on the
inner blade and outer blade using
the cleaning brush.
3. Attach the blade.

Get other manuals https://www.bkmanuals.com
4
. Rinse under running water.
4
▼