Publicité
Les langues disponibles
Les langues disponibles
EN
Supply of Machinery (Safety) Regulations 2008
Ninebot (Changzhou) Tech Co., Ltd. hereby declares that the product listed in this section comply with the essential
requirements and other relevant provisions of The Safety of Supply of Machinery (Safety) Regulations 2008.
UK Authorised Representative：
UKCA Experts Ltd.
Dept 302, 43 Owston Road Carcroft, Doncaster, DN6 8DA, United Kingdom
Ninebot (Changzhou) Tech Co., Ltd. hereby declares that the product model: F65I complies with the essential
requirements and other relevant provisions of the Radio Equipment Regulations 2017， Supply of Machinery (Safety)
Regulations 2008 and the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic
Equipment Regulations 2012.
The declaration of conformity can be viewed at the following address: www.segway.com
Frequency Band(s)
Bluetooth
Max. RF Power
06
2.4000-2.4835GHz
20mW
Recommended Maintenance Schedule
4
To ensure safe riding, day to day care and regular maintenance are essential. You, the owner, have control and knowledge of
how often you use your scooter, how hard you use it and where you use it. It is the owner's responsibility to perform regular checks
and bring your scooter to authorized service center for inspection and service. Please refer to the maintenance schedule
below.
Note: This maintenance schedule charges a service fee.
Item
Component
Maintenance Method
Mainframe parts Use a soft, wet cloth to wipe the mainframe clean.
Inflate tires to 40–45 psi. Note: Remember to screw
Tire pressure
the valve cap after inflating!
Check if the tires are cracked, deformed, or
Tire wear
significantly worn.
Tighten the six screws fixed with the handlebar and the
stem. The suggested torque is 3.0±1.0 N·m.
Tighten the screw on the throttle. The suggested
Mainframe
Screws on the
torque is 2.0 N·m.
maintenance
stem top
Tighten the screws on the brake levers. The suggested
torque is 7–9 N·m.
Tighten the screws on the stem top. The suggested
torque is 10±0.5 N·m.
Tighten the two screws fixed with the front fork and the
folding mechanism. The suggested torque is 10±1 N·m.
Screws on the
folding
If the stem gets shaky when riding, tighen the screws on the
mechanism
folding mechanism when the scooter is in folded state.The
suggested torque is 15±1 N·m.
Every 6
After 2 years or
months or
the total
every 310
mileage > 3107
miles (500
miles (5000
km)
km)
√
√
√
Every 3
months
√
√
√
√
√
√
√
√
√
√
√
√
EN
07
Publicité
