Publicité
Les langues disponibles
Les langues disponibles
OPERATION
USING THE SPRAY GUN
See Figure 16.
WARNING
with two hands (one hand to pull the trigger and the
other to stabilize the gun) until you get used to the
"recoil". Do not lose control of the spray gun doing so
could result in injury to yourself and others.
l Start the pressure washer.
l Release the safety lock by pushing it down into the slot
in the trigger.
l Squeeze and hold the trigger to start the flow of water.
l Release the trigger to stop the flow of water.
l Lock the trigger by pushing it up to its original position.
NOTE: Squeeze the trigger to make sure its locked and
will not move. ALWAYS keep the spray gun locked when
it's not in use.
SELECTING NOZZLES
The quick-connect coupler on the spray lance allows chang-
ing between nozzles while the pressure washer is running.
WARNING
before changing a nozzle.
Concrete, Brick, Masonry
Siding, Gutters, Home
Fencing, Deck, Patio
Lawn and Garden Equipment,
Boats, RVs
Recommened nozzle
Hold the spray gun and lance
Always engage the trigger lock
NOZZLE SELECTION
RED
0
X
X
X
Use with caution X Do not use
FIG. 16
A - Trigger
B - Safety Lock
NOTICE
plied with the pressure washers. Using any other noz-
zles can affect performance and may void the warran-
ty. For replacement nozzles call (855) 944-3571.
CHANGING THE NOZZLE
See Figure 17.
Pull back the quick-connect collar at the end of the spray
lance. Insert the nozzle then release the collar. Pull on the
nozzle to make sure it is secured.
HIGH PRESSURE WASH
YELLOW
GREEN
15
25
o
o
B
A
Only use the nozzles that were sup-
WHITE
40
o
o
LOW PRESSURE
WASH
SOAP
English | 15
Publicité
