Operating Instructions
CONTROL PANEL
Indicator light illuminates to signify the cooling mode is currently
in operation.
Control the interior light ON/OFF. (If you press this button, the
inner light is not controlled by the Reed Switch, it is continuous-
ly lit).
To turn appliance on/off (press and hold this button for approxi-
mately 3 seconds).
Used to raise (warm) the temperature by 1° increments.
Used to lower (cool) the temperature by 1° increments.
Adjacent indicator light denotes which scale of temperature is
°C / °F
being displayed.
FUNCTION INSTRUCTION
Door Ajar Alarm Function
•
If the door is not closed completely the alarm will sound after 5 minutes. Please close the door completely to avoid the
loss of cold energy.
Temperature Memory Function
•
If power is lost the set temperature will be saved by the unit. Once the power is back on the unit will return to the
same set temperature.
Temperature Alarm Function
•
"HI" is shown on the display panel and the alarm will sound after one hour. It is to inform you that the inner tempera-
ture is too high, please check the reason.
•
"LO" is shown on the display panel and the alarm will sound and the malfunction indicator light will appear at the same
time.
If too many bottles/cans are put in at once or the door has not been closed tightly, the unit will display the "HI" signal in the
display panel. This is normal, please wait 5 minutes after you close the door and "HI" will disappear.
It is normal that the cabinet shows "HI" or "LO" from time to time. If it occurs frequently or lasts for a long time, you can
restart the unit by unplugging it. If the problen occurs once again after restart, please contact customer service.
Setting the Temperature Controls
When you plug in your beverage centre for the fi rst
time the temperature will automatically be set to
12°C (54°F). The default setting is °F.
•
Each depression of the ▲
allow you to adjust the temperature in 1° incre-
ments.
•
To switch the display between °F and °C, de-
press the ▲
▲
mately 3-5 seconds.
6
▲
or ▼
▼
button will
and ▼
▼
simultaneously for approxi-