Publicité
Les langues disponibles
Les langues disponibles
2
• If detector optional locking is not activated:
turn the detector anti-clockwise
to unlock it.
• If detector optional locking is activated:
A. insert a flat blade screwdriver into
the slot,
B. turn the detector anti-clockwise
to unlock it.
3
If the detector was part of a network, refer to 2.3. Installing a detector as part
of a network.
4
• Position the new detector on its base by turning it clockwise until it is
completely locked.
• Test the detector (see Testing the detector).
5.3. In case of work in the home
The detector must not be painted.
If work is to be carried out after the
detector has been installed, cover it
completely.
B.
A.
Do not forget to remove the
protection when the work is
finished.
99
Publicité
