Publicité
Les langues disponibles
Les langues disponibles
2.4. Installing the detector as a relay
If the radio range between all the detectors is insufficient, one of the detectors can be
progra-med as a relay. This means that it will re-transmit alarms received to all the
other detectors.
Examples:
A. If an alarm is activated on
detector 1, only detector 2
and the control panel will be
triggered.
B. Detector 2 is programmed
as a relay.
If an alarm is activated on
detector 1, the detector
retransmits the information
on the whole installation.
92
A
B
Detector 1
Detector 2
Detector 1
Radio
range
limit
Publicité
