Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
• The refrigerator inclination angle should be
less than 45°.
• Do not lay the unit fat as this may damage the
coolant system.
• You should rest the Appliance on something
solid e.g. a chair just below the top panel.
• We recommend that 2 people handle the unit
during assembly.
Deposit doors
1. Remove the right top hinge cover.
2. Remove the screws fixed the top hinge with
cross-slot screwdriver.
GB-16
Screw
(two)
3. A. Remove the nut with sleeve. Take off the
washer then remove the axes to the other side
and fixed.
B. Take off upper door then remove the door
limit block and place it to opposite side.
limit
block
4. Disassemble the screws fixed the bottom
hinge with cross slot screwdriver.
Note: The refrigerator-freezer incline angle
less than 45 °.
ENGLISH
The screws
Fixed the
Bottom-hinge
GB-17
Publicité
