Publicité
Les langues disponibles
Les langues disponibles
.'
BEFORE OPERATION
AUDIO ADJUSTMENTS
CD
To
turn
the
unit on
VOLUME
PHONES
T-BASS
VOLUME
,..
T-BASS
SHIFT
VOLUME
Press one of the function buttons (TAPE, TUNER, VIDEO/AIJK
CD).
Turn the VOLUME control
on the main unit, or press the
Playback of the inserted disc or tape begins, or the previously
VOLUME buttons on the remote control.
tuned station is received (Direct Play Function).
The volume level is displayed as a number from O to MAX (31).
The POWER button is also available.
The volu~e level is automatically set to 16 when the power is
When the unit is turned on, the disc compartment may open and
turned off with the volume level set to 17 or more.
close to reset the unit.
DEMO (Demonstration)
mode
When
the 'AC cord
is connected,
the display
window
demonstrates the functions of the unit. When the power is turned
on, the DEMO display is overridden by the operation display.
When the power is turned off, the DEMO mode is restored.
To cancel DEMO mode
Press the II SET button while the power is off. The clock
flashes on the display. (To set the current time, see "SETTING
THE CLOCK on page 15.) To re-activate DEMO mode, press
the -
button while the power is off.
Flash window
SUPER T-BASS SYST,EM
The T-BASS system enhances the realism of low-frequency
sound.
Press the T-BASS button.,
Each time it is pressed, the level changes.
Select one of the
three levels, or the off position to suit your preference.
&+l++2~+3~oFF
(cancel)~
I
The window on the top of the unit lights up or flashes while the
To select with the remote centrol
unit is being powered on.
press the T-BASS button while pressing the SHIFT button.
To turn off the light of the top window, press the CD button while
pressing the
button. To turn back on, repeat the above.
m
To turn
the unit off
Low frequency sound may be distorted when the T-BASS system
Press the POWER button.
is used for a disc or tape in which low frequency sound is
originally emphasized. In this case, cancel the T-BASS system.
Using the headphones
Connect headphones to-the PHONES jack with a standard stereo
plug (06.3 mm,
'/4
inch).
No sound is output from the speakers while the headphones are
plugged in.
Sound adjustment
during recording
The output volume and tone of the speakers or headphones may
be freely varied without affecting the level of the recording.
5
ENGLISH
Publicité
