Aiwa CX-NA22 Mode D'emploi page 12

1
BASIC RECORDING
This section explains how to record from the tuner, CD player, or
external equipment.
h 1- % 1
Preparation
Use Type I (normal) tapes only.
Set the tape to the point where recording will start.
Note that recording is done only one side of the tape.
1 Insert the tape to be recorded on into deck 2.
Insertthe tape with the side to be recordedon first facing
out from the unit.
2 Press one of the function buttons and prepare
the source to be recorded.
To record from a CD, press the CD button and load the
disc(s).
To record from a radio broadcast, press the TUNER button
and tune in to a station.
To record from a connected source, press the VI DEO/AUX
button and play.
3 Press the
REC button to start recording.
When the selected function is CD, playback and recording
start simultaneously.
To stop recording, press the button.
To pause recording, press the II button. (Applicable when the
source is TUNER or VIDEO/AUX) To resume recording, press it
again.
To erase a recording
1 Insert the tape to be erased into deck 2 and press the TAPE/
DECK 1/2 button to display "TAPE 2.
2 Set the tape to the point where the erasure is to be started.
3 Press the REC button to start the erasure.
I 1
ENGLISH