Connecting The Power Cord And The Speaker Cable - Pioneer AppRadio SPH-DA01 Manuel D'installation

Section
02 Connecting the system

Connecting the power cord and the speaker cable

Yellow (BATT+)
To terminal supplied with power regardless
of ignition switch position.
Red (ACC)
To electric terminal controlled
by ignition switch (12 V DC) ON/OFF.
Orange (ILLUMI)
To lighting switch terminal.
Black (GND)
To vehicle (metal) body.
8
En
Note
When a subwoofer is connected to this product
instead of a rear speaker, change the rear output
setting in the initial setting. (Refer to Operation
Manual.) The subwoofer output of this product is
monaural.