Publicité
Les langues disponibles
Les langues disponibles
8 CONNECTIONS
• Do not plug in the power cord until all connections have been
completed.
• Be sure to connect the left and right channels properly (left with
left, right with right).
• Insert the plugs securely. Incomplete connections will result in
the generation of noise.
• Use the AC OUTLETS for audio equipment only. Do not
use them for hair driers, etc.
Connecting the audio components
Decoders with 6-channel
analog outputs, etc.
LINE OUT
LOOP
ANT.
ANTENNA TERMINALS
FR
SW
SR
LINE IN
LINE OUT
Tape deck or CD recorder
R
L
R
L
R
L
R
L
INPUT
OUTPUT
Connecting a tape deck
Connections for recording:
Connect the tape deck's recording input jacks (LINE IN or
REC) to this unit's tape recording (OUT) jacks using pin plug
cords.
Connections for playback:
Connect the tape deck's playback output jacks (LINE OUT or
PB) to this unit's tape playback (IN) jacks using pin plug cords.
CD recorder, MD recorder or other component
equipped with digital output lacks.
B
OUTPUT
DIGITAL jacks
Use these for connections to audio equipment with digital output. Refer
to Page 20 for instructions on setting this terminal.
• Use 75 Ω/ohms cable pin cords (sold separately) for coaxial
connections.
• Use optical cables (sold separately) for optical connections.
R
L
AUDIO
DIGITAL
PRE OUT
R
L
IN
IN
AM
SUB
CD
WOOFER
DVD/
DVD/
VDP
VDP
IN
FM
TV/
TV/
COAX.
COAXIAL
DBS
DBS
75
VCR
VCR
CDR/
OPTICAL
FL
MONITOR
TAPE
VCR
C
VCR
CDR/
SL
OPTICAL
TAPE
OUT
OUT
OUT
EXT. IN
VIDEO
R
L
R
L
OPTICAL
INPUT
• Note that binding pin plug cords together with power cords or
placing them near a power transformer will result in generating
hum or other noise.
• Noise or humming may be generated if a connected audio
equipment is used independently without turning the power
of this unit on. If this happens, turn on the power of the this
unit.
IN
OUT
DVD/
TV/
VDP
DBS
VCR
MONITOR
VCR
S-VIDEO
SPEAKER SYSTEMS
FRONT
B
A
R
L
R
L
SPEAKER IMPEDANCE
FRONT A OR B / 6 16
A + B / 6 16
Subwoofer jack
Connect the internal amplifier's subwoofer to the subwoofer
terminal. (Refer to page 13.)
AC OUTLETS
• SWITCHED
(total capacity – 120 W (1 A.))
The power to these outlets is turned on and off in conjunction with
the POWER switch on the main unit, and when the power is
switched between on and standby from the remote control unit.
No power is supplied from these outlets when this unit's power is at
standby. Never connect equipment whose total capacity is above 120
W (1 A.)
NOTE:
Only use the AC OUTLETS for audio equipment. Never use them for
hair driers, TVs or other electrical appliances.
CD player
OUTPUT
R
L
DIGITAL AUDIO
DIGITAL AUDIO
R
L
LINE OUT
AC CORD
AC 120V, 60Hz
AC OUTLETS
CENTER
SURROUND
AC 120V 60Hz
SWITCHED
R
L
TOTAL 120W(1A.) MAX.
CENTER
/ 6 16
SURROUND / 6 16
Connecting the AC OUTLETS
Connecting a CD player
Connect the CD player's analog
output jacks (ANALOG OUTPUT) to
this unit's CD jacks using pin plug
cords.
ENGLISH
9
Publicité
