20 SPECIFICATIONS
Audio section
2
• Power amplifier
Rated output:
Output terminals:
• Analog
LINE input - SPEAKER OUT
Input sensitivity / input impedance:
Frequency response:
S/N ratio:
Video section
2
• Standard video jacks
Input / output level and impedance:
Frequency response:
• S-video jacks
Input / output level and impedance:
Frequency response:
Tuner section
2
Receiving range:
Usable sensitivity:
50 dB quieting sensitivity:
S/N ratio:
Total harmonic distortion:
General
2
Power supply:
Power consumption:
Maximum external dimensions:
Weight:
Remote control unit (RC-896)
2
Batteries:
External dimensions:
Weight:
* For purposes of improvement, specifications and design are subject to change without notice.
(8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)
Front:
70 W + 70 W
(6 Ω/ohms, 1 kHz with 0.7% T.H.D.)
100 W + 100 W
(8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)
Center:
70 W
(6 Ω/ohms, 1 kHz with 0.7% T.H.D.)
100 W
(8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)
Surround:
70 W + 70 W
(6 Ω/ohms, 1 kHz with 0.7% T.H.D.)
100 W + 100 W
16 to 16 Ω/ohms
Front:
A or B
12 to 16 Ω/ohms
A + B
16 to 16 Ω/ohms
Center/Surround:
200 mV / 47 kΩ/kohms
10 Hz ~ 100 kHz: +1, –3 dB (TONE DEFEAT ON)
98 dB (IHF-A weighted) (TONE DEFEAT ON)
1 Vp-p, 75 Ω/ohms
5 Hz ~ 10 MHz — +1, –3 dB
Y (brightness) signal — 1 Vp-p, 75 Ω/ohms
C (color) signal — 0.286 Vp-p, 75 Ω/ohms
5 Hz ~ 10 MHz — +1, –3 dB
[FM] (note: µV at 75 Ω/ohms, 0 dBf = 1 x 10 –
87.50 MHz ~ 107.90 MHz
1.0 µV (11.2 dBf)
MONO
1.6 µV (15.3 dBf)
STEREO
23 µV (38.5 dBf)
MONO
80 dB (IHF-A weighted)
STEREO
75 dB (IHF-A weighted)
MONO
0.15% (1kHz)
STEREO
0.3% (1kHz)
AC 120 V, 60 Hz
3.7 A
434 (W) x 147 (H) x 417 (D) mm (17-3/32" x 5-25/32" x 16-7/16")
9.8 kg (21 lbs 9.7 oz)
R6P/AA Type (two batteries)
54 (W) x 172.5 (H) x 29 (D) mm (2-1/8" x 6-25/32" x 1-9/64")
120 g (Approx. 4.2 oz) (including batteries)
15
W)
[AM]
520 kHz ~ 1710 kHz
18 µV
ENGLISH
47