Denon AVR-1682 Mode D'emploi page 24

ENGLISH
12 OPERATION
Before operating
B
1 2
1
24
CD MD/CDR
AUDIO VIDEO
POWER
AVR/AVC TV VCR DVD/VDP
ON
CD DVD/VDP
1 2 3
OFF
V. AUX VCR TV/DBS
4 5 6 7
Preparations:
Check that all connections are proper.
1 Turn on the power.
Press the ON/STANDBY button on the main unit or AVR/AVC
button on the remote control unit to turn on the power.
(Main unit)
• ON/STANDBY
When the button is pressed, the power turns on and the
display lights after approximately 1 second.
When pressed again, the power turns off, the standby
mode is set and the display turns off.
Several seconds are required from the time the power
operation switch is set to the "ON" position until sound is
output. This is due to the built-in muting circuit that
prevents noise when the power switch is turned on and off.
2 Select the front speakers.
Press the SPEAKER A or B button to turn the speaker on.
(Remote control unit)
(Main unit)