Siemens euroset 2010 Mode D'emploi page 5

19.04.2000 2010-
euroset 2010,IM1, A31008-E2010-B100-2-3S19
Hearing and being heard
Setting the volume of tone ringing
There are 3 tone ringer volume settings (factory setting: 3).
>"
Setting while the telephone is in standby:
 
Lift the handset, then start the function.
Press one of the keys1 ... 3:
...
"< 1
= Lowest volume,
3 = Highest volume
Press the set key, then replace the handset.
Setting while the telephone is ringing:
Before lifting the receiver, press the
time the key is pressed. The last level set is saved.
Setting the frequency of the ringing tone
>"
There are 3 settings for the frequency (speed) of tone ringing
(factory setting: 3).
Lift the handset, then start the function.
 
"< Press one of the keys 1 ... 3:
1
= Lowest frequency;
...
Press the set key, then replace the handset.

Setting while the phone is ringing
Press before lifting the handset. The frequency changes each time you
press a key (max. 3 levels). The last frequency set is stored.
key. The volume is adjusted each
3
= Highest frequency.
– 5 –
- English -